Once the file is 'created' in my target directory it becomes the same as the PC version. With my Mac, even though I did a chmod 777 on my tftp directory, I had to do the following before I attempted to upload the software. On the Mac, I found it to be a little bit different. Once you've stopped then started the server, you simply need to issue the commandĪs this command is running, it extracts the current running IOS, including the HTML files, and tar them as it's sending to the TFTP server. I tested this with TFTPd32 on a PC, and with TFTPServer on a Mac(10.6). The first thing you need, is a TFTP server. In this example, I am using a 1131, running 12.4(21a)JY Here is a quick recap showing how to process the code with the archive command!Įver lost the code you were running on an AP? Then need to load that code to another? What if that codes not available for download from CCO anymore? Well, there's a pretty easy process to get through to get the image from an AP, and onto your TFTP server. If a wireless client is unable to authenticate with the wireless device, contact the system administrator for proper security settings in the client adapter and for the client adapter driver and firmware versions that are compatible with the wireless device settings.Since Cisco is locking down software downloads, you may have a need to pull code off your existing access points. If radio clients are configured to authenticate using EAP-FAST, Open Authentication with EAP should also be configured.” “Network EAP is used for LEAP authentication only. If you are using the GUI, this warning message appears: SSID CONFIG WARNING: : If radio clients are using EAP-FAST, AUTH OPEN with EAP should also be configured. If you do not configure open authentication with EAP, a warning message appears. If your radio clients are using EAP-FAST authentication, you must configure open authentication with EAP. Wireless clients attempting to authenticate with the wireless device must support the same security options configured in the wireless device, such as EAP or LEAP, MAC address authentication, Message Integrity Check (MIC), WEP key hashing, and 802.1X protocol versions.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |